|
Specifications:
Casing: Paltech casing is constructed from FRP moulded panels suitably flanged. All joints sealed with water proof compound and bolted together with galvanised steel bolts or stainless steel bolts unless specified otherwise. Additional embossing is done for extra strength.
Fill: General fill consists of Honeycomb PVC film type splash deck is modules with high resistant to corrosion & highly efficient for heat transfer .
Fan: The fan consists of axial propeller fan blades of special alloy aluminium blades of designed aerofoil construction. The blades are of adjustable pitch connected to a common M.S.H.D.G./Aluminium Alloy Hub. The fan is statically balanced.FRP fan set can also be supplied on request at extra cost.
Drift Eliminator: To reduce carry out losses through entrainment of moisture rops in the air stream by specially designed multiblade rotary drift eliminator made of FRP aluminium sheets.
Motor: Special low RPM totally enclosed motors of Vertical, Flange type with enlarged & threaded shaft and sealed top is supplied with the cooling tower. The motor is also weather proof and in IP-55 construction.
Water Distribution System: The hot water is raised by hot water riser & taken inside by a M.S.H.D.G./P.V.C. hot water header inside. Branch distribution pipes fitted with Polypropelene Splash cups / non clogging nozzles are connected to hot water header and uniform water distribution over entire fill is achieved.It is totally maintenance free distribution.
Capacity Available : 3 TR to 1000 TR in single cell. Larger capacities are available in multiple cell construction.
NOTE : Dimensional & other engineering data available with proposal/quotation.
|
