Pultruded FRP Cooling Towers

The Pultruded FRP Cooling Towers are not only light weight but are non corrosive and have long life and high strength.

The construction and installation time is very less compared to conventioned RCC or wooden Cooling tower.

Paltech Pultruded FRP Cooling Towers are available with single cell capacity upto 5000 M3/Hr & Multi cell capacities upto any size in counter flow design with film fill & splash fill design.

Paltech, Pultruded FRP Cooling Towers which are not only efficient but also of ultimate quality, reliability and longevity. They are best suited for sea water application, as a replacement for old large Wooden Cooling Towers and as a new Cooling Tower instead of RCC or Wooden Cooling Towers.

STRUCTURE is made up of Pultruded Fiberglass material.

HARDWARE Hot dip galvanized are used to withstand corrosion. Stainless Steel hardware is available at extra cost.

CASING is made up of Pultruded FRP/Corrugated FRP Sheets of adequate thickness.

FAN DECK is made up of robust & Strong Pultruded FRP Panels/Sheets.

FRP FANS are of proven design provided by Indian Institute of Technology.

FAN CYLINDER is made up of tough & durable FRP/GRP material.

DRIFT ELIMINATOR Paltech Uses efficient PVC Drift Eliminator in cellular / full wave design to reduce water losses & fan air pressure resulting in low energy consumption by fan. Fill of Film type or Splash type as per requirement of client is provided.

NOZZLES made up of PP/PVC, non clogging type are provided for optimum efficiency. Drive shafts duly balanced in SS/HDG Steel material in hollow construction are provided.

GEAR BOX Paltech Gear Box of Spiral bevel or Spiral Bevel cum helical, design is validated by Indian Institute of Technology. These are made to meet requirement of STD-III of CTI, USA and AGMA standards. Prior to shipment, load testing of each & every gear box, is carried out at factory to provide our clients zero defect Gear Box.